Dredge Brokers - Used Dredgers (Dredges) For Sale


16-inch Cutter Suction Dredger (New Build)

16-inch Cutter Suction Dredger (New Build)

This 16-inch Cutter Suction Dredger is a New Build, everything is new, and the main engine is CAT, with extension ladders up to 18 m. The photos are of a sister dredger, not the actual dredger for sale. Production time approximately 6 months.

Located in Estonia

Select Your Currency
Price in Seller's Preferred Currency
USD 890,000
Price in Your Preferred Currency
USD 890,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Length Over All (w/out ladder): 12.00 m 39 feet
  Beam: 4.80 m 16 feet
  Depth: 1.50 m 5 feet
  Mean draft (with full bunkers) approx.: 0.88 m 3 feet
  Dredging Depth: 15.00 m 49 feet
  Total Dry Weight: approx. 40 tons
Main Engine
  Make/Model: Cat / C18 ACERT
  Type: Industrial Engine (Tier 3/Stage IIIA )
  Power @ 2,100 RPM 597 kW 800 hp
  Power: 30 kW 40 hp

Cutter Diameter: 

1,400 mm 55 inches
  Material: High manganese steel

Number of Cutter Blades: 

6; replacement teeth CAT
Dredge Pump           
  Make/Model: 16Гр-II-(7)-840R-РЕТ
  Power at Shaft @ 750 RPM 800 kW 1,073 hp
  Pump Capacity: 2,200 cubic meters/hr 2,877 cubic yards/hr
  Pump Discharge: 304.8 mm 12 inches
  Suction Pipe Diameter: 400 mm 16 inches
  Discharge Pipe Diameter: 400 mm 16 inches
  Impeller Diameter: 840 mm 33 inches
Gear Box  

ZF Friedrichshafen AG / ZF 500 

  Type: Vertical offset, direct mount marine transmission
  Max. Power @ 3,000 RPM 1,173 kW 1,573 hp
  Reduction Ratio: 1 / 2,9
  Ladder Winch:

60KN/12~15m/min x 1 Power: Hydraulic drive

  Swing Winches (2): 60KN/9~12m/min x 2 Power  Hydraulic drive   
Service Pump  
  Make/Model: VARISCO (Italia) / N2SG 40-26.264                
  The service pump is provided to supply flushing water to the dredge pump packing gland, water to the cutter
  drive bearings and for a use at a deck connection.
  Dimensions: 650 x 500 mm 26 x 20 inches
  Rated @: 8 liters/sec. 2 gallons/sec.
Hydraulic System                            
  The hydraulic pump x 2 pcs; that provides service to the cutter head motor, swing winches, spud
  winches and ladder winch. The hydraulic system is protected by relief valves and the system has replaceable
  inline filters. 
  Capacity (approx.): 400 liters 106 gallons
Electrical System  
  The electrical system consists of a 24-volt 65-amp alternator and a 240 amp/hr battery.  The wring is a complete
  circuit with one (1) wire to ground through a full breaker panel.  The lighting consists of seven (7) LED floodlights
  that are mounted on the dredge.  Lighting is also provided in the engine/pump compartment, on the instrument
  panel and overhead in the lever room.
Lever Room           
  The lever room measures: 1.80 x 1.90 x 1.90 m 5.9 x 6.2 x 6.2 feet
  All glass is TRIPLEX (KLAAS C) with 360 degree visibility. An upholstered seat is provided for the operator. The
  lever room is insulated for the reduction noise and for temperature control.  The lever room is finished with a
  paneled interior.
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright © 2019