Dredge Brokers - Used Dredgers (Dredges) For Sale

140225-PP

New HDPE Pipes Specific for Dredging with Integrated Floats

New HDPE Pipes Specific for Dredging with Integrated Floats

These new HDPE pipes and floats are designed and manufactured specifically for the sector of dredging.

Pipes suitable for the transportation under pressure of liquids, with a mixture of water and inert such as clay, silt, sand, gravel and solids of large size.

High pressure resistance.
Diameters 6-inch to 20-inch (152.4 mm to 508 mm) - 25 Bar (360 PSI)
Diameters 22-inch to 48-inch (558.8 mm to 1,219.2 mm) - 16 Bar (230 PSI)

Two different types of floats available:
1 - Standard empty floats composed by two shells, to be connected around the pipes on site.
2 - Integrated floats “model KGP”, composed by a single shell, filled with polyurethane foam, integrated to the pipe, reliable and resistant, suitable for hard working conditions, free from installation costs as they come already installed.

Located in Italy

Price on Request

Technical Details

 
Principal Dimensions and Characteristics

Pipes

  Production Standard: International EN12201
  Raw Material: HDPE PE100
  Diameter Range of Production:
    Minimum: 160 mm 6 inches
    Maximum: 1,200 mm 48 inches
  Available Pressure Ratios:
    Minimum: PN4 (58 PSI)
    Maximum:

PN25 (360 PSI) up to OD 20-inches (508 mm)

      PN16 (230 PSI) up to OD 48-inches (1,219.2 mm)
  Available Sections Length: 5.8 m 20 feet
    11.8 m 40 feet
  Available Connections: Flanges/stub ends – plain pipe for direct welding on site
  Flange Production Standards: ISO - ANSI
  Gasket: Included
  Bolts and Nuts Not Included (quoted separately if requested)

Empty Floats

  Raw Materials: HDPE PE100
  Diameter range (ID):
    Minimum: 160 mm 6 inches
    Maximum: 710 mm 28 inches
  Production Process: Rotational Molding
  Shell Thickness 7 mm 0.275 inches
  Internal: Empty
  Bolts, Nuts, and Washers: Included

KGP Model Floats:

  Raw Material: HDPE PE100
  Diameter Range:
    Minimum: 355 mm 14 inches
    Maximum: 1,000 mm 40 inches
  Production Process: Rotational Molding
  Shell Thickness: 7 mm 0.275 inches
  Internal: Filled with polyurethane foam
  Bolts, Nuts, and Washers: Not Necessary
  Spacers: Not Necessary
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005