Dredge Brokers - Used Dredgers (Dredges) For Sale

140328-DB

500 mm (20-inch) IHC Beaver 5014

500 mm (20-inch) IHC Beaver 5014

This 500 mm (20-inch) IHC Beaver 5014 was built in 2005 and its Classification Society and Notation is BV (Bureau Veritas), Sailing area: near-coastal. The vessels main purpose has been for dredging and reclamation of soil.

Flag: Russia

Located in West Russia

Select Your Currency
Price in Seller's Preferred Currency
EUR 1,650,000
Price in Your Preferred Currency
USD 1,875,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Year Built: 2005
  Classification Society/Notation: BV (Bureau Veritas), Sailing area: near-coastal
  Length Over All (ladder raised): 35.10 m 115 feet
  Molded Length Over Pontoons: 23.50 m 77 feet
  Molded Breath: 9.50 m 31 feet
  Draft: 1.50 m 5 feet
  Molded Side Pontoons: 23.50 m x 2.95 m x 2.46 m 77 feet x 10 feet x 8 feet
  Total Dry Weight approx.: 174 tons
  Max. Dredging Depth: 14.00 m 46 feet
  Length of Floating Pipeline: 1,000 m 3,281 feet
Dredge Pump
  Make/Model: IHC HR/MD 91-19-45
  Power at Shaft: 690 kW 938 hp
 

Internal Diameter of Suction Tube:

500 mm 20 inches
 

Internal Diameter of Discharge Pipes:

500 mm 20 inches
Main Engine
  Make/Model: Caterpillar/3508 B-SCAC
  Power @ 1,600 RPM: 746 kW 1,015 hp
Auxiliary Engine
  Make/Model: Caterpillar/3406C
  Power @ 1,800 RPM: 354 kW 496 hp
Cutter
  Make/Model: IHC/10-CB-AL-1455-180
  Power at Shaft @ 30 RPM: 170 kW 231 hp
  Diameter: 1,455 mm 57 inches
Winches
  Ladder Winch/Swing Winches:
  Line Pull, 1st layer: 110/110 kN
  Max. Line Speed: 20/20 m/min
  Wire Diameter: 24/24 mm 0.94/0.94 inches
  Drum Diameter: 457/457 mm 18/18 inches
  All winches have independent hydraulic drive.
  The two swing winches are supplied with wires of 100 mm (4 inches) and anchors of 730 kg.
Spuds
  Length: 18.60 m 61 feet
  Diameter: 610 mm 24 inches
  Weight: 6,208 kg
Spud Hoisting Rams
  Force: 257 kN
  Ram Stroke: 2.10 m 7 feet
  Spud Stroke (each time approx.): 3.15 m 10 feet
Swing Width with 35 degree Swing each side
  At Max. Dredging Depth: 30.50 m 100 feet
  At Min. Dredging Depth: 39.00 m 128 feet
Deck Crane
  Lifting Power: 20 kN
  Outreach: 3.50 m 11 feet
Tools
  Special tools are supplied for connecting and disconnecting pontoons and ladder and for
  maintenance of dredge pump and diesel engine.
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005