Dredge Brokers - Used Dredgers (Dredges) For Sale

140707-DS

1,300 Cu/yd Trailing Suction Hopper Dredger (TSHD)

1,300 Cu/yd Trailing Suction Hopper Dredger (TSHD)

This 1,300 Cu/yd Trailing Suction Hopper Dredger (TSHD) was built in 1980 and its Classification Society is ABS (American Bureau of Shipping), All Oceans and is valid through Feb., 2016 and the International Load Line is valid through Feb., 2016.

Located in the state of Massachusetts, USA

Price on Request

Technical Details

 
Principal Dimensions and Characteristics
  Year Built: 1980
  Length Over All: 60.05 m 197 feet
  Beam: 12.44 m 40.8 feet
  Depth: 5.03 m 16.5 feet
  Light Draft (Fwd): 1.62 m 5.3 feet
  Light Draft (Aft): 2.66 m 8.7 feet
  Light Draft (Avg.): 2.13 m 7 feet
  Loaded Draft (Avg.): 4.51 m 14.8 feet
  Gross Tonnage: 760.60 tonnes
  Light Ship Displacement: 919.13 tonnes
  No. of Dragarms: 1
  Hopper Length: 32.00 m 105 feet
  Hopper Width: 6.71 m 22 feet
  Hopper Capacity: 994 cubic meters 1,300 cubic yards
  Bottom Dump and Bow Discharge Capabilities
  Max. Digging Depth @ 45 degrees: 19.81 m 65 feet
  Bunkers:
    Fuel Capacity: 94,635 liters 25,000 gallons
    Potable Water Capacity: 28,391 liters 7,500 gallons
Propulsion
  2 x Niigata ZP-D8 Z Drives
  Main Engines (2):
  Make/Model: CAT / D398
  Power: 634 kW x 2 850 hp x 2
Dredge Pump
  Power: 523 kW 700 hp
  Pump RPM - Dredging: 290 RPM
  Pump RPM - Pumping Out: 360 RPM
  Suction Pipe Diameter: 558.8 mm 22 inches
  Discharge Pipe Diameter: 508 mm 20 inches
  Pump Impeller Diameter: 1,219.2 mm 48 inches
Jet Pump
  Power @ 1,725 RPM: 75 kW 100 hp
  Discharge Pipe Diameter: 152.4 mm 6 inches
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005