Dredge Brokers - Used Dredgers (Dredges) For Sale

150407-SE

15 lbs/min Complete Portable Polymer Preparation System 15 lbs/min Complete Portable Polymer Preparation System

15 lbs/min Complete Portable Polymer Preparation System

This 15 lbs/min Complete Portable Polymer Preparation System is designed to prepare up to 15 lbs/minute of active
polymer in a dry form. The system is installed in three (3) sea containers and is designed to make down polymer at
a 0.5% solution into five (5) mixing/aging tanks. The system contains four (4) feed pumps with variable frequency
drives. Two (2) pumps are designed for pumping 0.5% polymer solution up to 1,000 gpm at pressure up to 120 psi
and two (2) pumps are designed for pumping a 0.5% polymer solution at a variable range up to 200 gpm at pressure
up to 120 psi.

Located in the state of New York, USA

Can be purchased "En-Bloc" with 150408-SE - 20,000 gallon Fiberglass Storage Tanks (used for Polymer)

Select Your Currency
Price in Seller's Preferred Currency
USD 185,000
Price in Your Preferred Currency
USD 185,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
Major Components
         
  Three (3) Sea Containers: 12.19 x 3.05 x 3.05 m 40 x 10 x 10 feet
 

Two containers are stacked:  the top container houses an electric chain hoist and storage space
for super sacks; the bottom container houses the mixing/aging tanks and mixers. The single
container houses the primary and secondary polymer feed pumps.  All containers include an air conditioner and unit heater.

   
  Polymer screw feeder (located  in the bottom container). Stainless shaft and propeller, Siemens 
1 hp (0.75 kW), 460 V, 3 ph motor.  3003675233‐41, Vacon drive 12004204.
   
  Polymer make‐up water pump (P33).  Grundfos CR64‐1‐1, 10 hp (7 kW), 230/460 V, 3 ph. 
   
  Polymer water booster pump (P36).  Gould’s 3656 pump 16BF1L5HO, 10 hp (7 kW), 230/460 V, 3 ph.
   
  Two primary polymer feed pumps with VFD  (P49, P50). Netzsch Nemo 105BY01L07V‐000 with 40 hp
(30 kW), 230/460 V, 3 ph Nord motors. 
   
 

Two secondary polymer feed pumps with VFD (P29, P30). Netzsch Nemo   063BY01L07V‐000 with
10 hp (7 kW), 230/460 V, 3 ph Nord motors. 

   
Spare Parts
 
  • Primary and secondary polymer feed pump motors
  • Primary and secondary polymer feed pump rotor, stator and seals
  • Secondary polymer feed pump end
  • Polymer screw feeder
  • Polymer screw feed motor 
  • Polymer screw feed gearbox
  • Polymer screw feed coupler 
  • Polymer screw feed VFD 
  • Polymer make‐up water pump 
  • Polymer water booster pump 
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005