Dredge Brokers - Used Dredgers (Dredges) For Sale

110136-DH

14 x 12 Shark Dredge

14 x 12 Shark Dredge

This 14 x 12 Shark Dredge is a model # DSC 750 Series.

Located in Mexico

Select Your Currency
Price in Seller's Preferred Currency
USD 855,000
Price in Your Preferred Currency
USD 855,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
General
  Length Over All (with ladder): 25.48 m 83.6 feet
  Length Over All (with side tanks): 5.58 m 18.3 feet
  Hull Depth: 1.52 m 5 feet
  Mean Draft (with fuel): 10.36 m 34 feet
  Ladder length (with cutter): 13.11 m 43 feet
  Spud length (each): 12.19 m 40 feet
  Spud weight (each): 3.000 lbs.
  Approx. Dredge weight: 120,000 lbs.
Dredging Capacities (Operating Conditions)
  Digging depth:
  Minimum: 1.52 m 5 feet
  Maximum: 9.14 m 30 feet
  Maximum Channel Width (Single Pass)
  @ Minimum digging depth: 21.34 m 70 feet
  @ Maximum digging depth: 27.43 m 90 feet
Dredge Specifications
Hull
  Three (3) piece sectional hull:
  Side sections (2): 16.76 x 1.52 x 1.52 m 55 x 5 x 5 feet
  Center section (1): 10.67 x 2.62 x 1.52 m 35 x 8.6 x 5 feet
  Over All dimensions: 16.76 x 5.58 x 1.52 m 55 x 18.3 x 5 feet
Main Engine
  Make/Model: Caterpillar / 3412 DITA
  Power @ 2,100 RPM 559 kW 750 hp
Cutter Module
  Make/Model: DSC CD 3.75
  Cutting force: 7,944 lbs.
  Operating torque: 135,054 lbs.
  Cutting force per linear inch: 234 lbs.
  Cutter diameter: 864 mm ID 34 inches ID
  Shaft diameter: 95.25 mm 3-3/4 inches
  Cutter rating (power): 45 kW 60 hp
  Cutter speed variable: 28 RPM
Winches
  Swing Winches:
    Line pull: 12,000 lbs.
    Line speed: 22.86 m/min. 75 feet/min.
    Drum capacity: 97.54 m 320 feet
  Ladder Winches:
    Line pull: 8,000 lbs.
    Line speed: 35.36 m/min. 116 feet/min.
    Wire size: 14.27 mm 9/16 inch
  Spud Winches:
    Line pull: 5,000 lbs.
    Line speed: 30.48 m/min. 100 feet/min.
    Wire size: 14.27 mm 9/16 inch
Dredge Pump       
  Suction: 356 mm 14 inches
  Discharge: 305 mm 12 inches
  Impeller diameter: 914 mm 36 inches
  Material: Hi-chrome
Spuds       
  Type: Square
  Size: 4.88 x 4.88 m 16 x 16 feet
  Length: 12.19 m 40 feet
  Wall thickness: 7.92 mm 5/16 inches
Service Water Pump       
  Make/Model: Peerless / F21020A
  Size: 2-1/2 x 2 - 10
  Impeller size: 254 mm 10 inches
Electrical system       
  Battery: 24 VDC
Capacities       
  Fuel: 6,814 liters 1,800 gallons
  Hydraulic: 1,136 liters 300 gallons
Additional Features       
  Operator's chair
  Fire extinguishers (2) 10-Pound ABC
  Lighted ring buoy
  Handrails and kick rails
  Guards
  Early warning alarm and engine shutdown system
  Digging depth gage
  Cabin lights & cab heater
  Bilge pump - electric
  Replaceable point cutter
  Dredge pump priming system
  Dredge wash down system
  Hi-capacity service pump
  Paint: Hull - sand blast and coat with coal tar epoxy paint.
  Paint: Superstructure and structural - sand blast and coat with primer and topcoat of paint.
   
 

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Copyright 2005