Dredge Brokers - Used Dredgers (Dredges) For Sale

150832-DB

20-inch Cutter Suction Dredger - DSC "Shark" 13500D 20-inch Cutter Suction Dredger - DSC "Shark" 13500D

20-inch Cutter Suction Dredger - DSC "Shark" 13500D

The 20-inch Cutter Suction Dredger - DSC "Shark" 13500D was built in 2010. This dredge will be completing its current project at the end of September, 2015, after which she will be dry docked and sandblasted and painted, all systems will be overhauled, a new auxiliary engine will be installed and any repairs necessary will be conducted. She will be sold without pipe or tender however a full complement of spare parts will be included in the sale.

Located in Belize

Select Your Currency
Price in Seller's Preferred Currency
USD 2,000,000
Price in Your Preferred Currency
USD 2,000,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  General:
  Length Over All
    (Stern discharge to cutter nose. ladder up): 36.50 m 120 feet
  Length Over All (with side tanks): 8.40 m 28 feet
  Hull Depth: 1.50 m 5 feet
  Mean Draft (with fuel): 863 mm 34 inches
  Spud Length (each): 21.50 m 71 feet
  Spud Weight (each): 6,816 kg 15,026 lbs.
  Approx. Dredge Weight - Dry: 350,000 lbs. (159.3 tonnes)
  Hull:
  Three (3) Piece Sectional Hull:
    Side Sections (2): 22.90 x 2.40 x 1.50 m 75 x 8 x 5 feet
    Center Section: 13.90 x 3.60 x 1.50 m 46 x 12 x 5 feet
    Assembled Dimensions: 22.90 x 8.40 x 1.50 m 75 x 28 x 5 feet
Operating Conditions
  Digging Depth:
    Minimum: 1.50 m 5 feet
    Maximum: 17.00 m 56 feet
Machinery
  Main Engine:
    Make/Model: Caterpillar / C-32
    Power @ 2,100 RPM 895 kW 1,125 hp
  Auxiliary Engine:
    Make/Model: Caterpillar / C-15
    Power @ 2,100 RPM 433 kW 580 hp
Cutter Module
  Cutting Force: 17,386 lbs.
  Operating Torque: 679,073 in-lbs.
  Cutter Diameter (ID): 1,092 mm 43 inches
  Shaft Diameter: 159 mm 6-1/4 inches
  Cutter Rating: 149 kW 300 hp
  Cutter Speed Variable: 0-27 RPM
  Cutter Hydraulic Motor: DSC # 5100006670
  Cutter Hydraulic Pump: DSC # 5100007169
Hoisting (Winches) 
  Swing Winches:
    Planetary swing winches with integral parking brake and tension control.
    Line Pull - Bare Drum: 28,373 lbs.
    Wire Size: 22 mm 7/8 inches
    Drum Capacity: 190.00 m 624 feet
    WN 300 Winch Hydraulic Motor: DSC # 5100007067
  Ladder Hoist Winch:
    Planetary ladder winch with integral parking brake.
    Line Pull - Bare Drum: 28,373 lbs.
    Wire Size: 22 mm 7/8 inches
    WN 300 Winch Hydraulic Motor: DSC # 5100007067
    Ladder Winch Hydraulic Pump: DSC # 51000077170
  Spud Winches:
    Planetary spud winches with integral parking brake.
    Line Pull - Bare Drum: 28,373 lbs.
    Wire Size: 22 mm 7/8 inches
Spuds
  Type: Square
  Size: 60.9 + mm 24 inch square
  Length: 21.13 m 69 feet
  Weight: 10,647 lbs.
Service Water Pump (Hydraulically driven)
  Make/Model: Goulds / 3756M
  Suction Diameter: 76 mm 3 inches
  Discharge Diameter: 63.5 mm 2-1/2 inches
  Hydraulic Drive Motor: DSC # 5100007164
Dredge Pump      
  Make/Model: Pearce /46PFSBLH VD NF AV NV
  Suction Diameter: 508 mm 20 inches
  Discharge Diameter: 508 mm 20 inches
  Impeller Diameter: 1,168.4 mm 46 inches
Capacities
  Fuel: 48,453 liters 12,800 gallons
  Hydraulic OIL: 1,893 liters 350 gallons
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005