Dredge Brokers - Used Dredgers (Dredges) For Sale

151141-DB

10-inch Cutter Suction Dredger

10-inch Cutter Suction Dredger

This 10-inch Cutter Suction Dredger was built in 1967, the hull was replaced in 1983 and machinery was upgraded in 2004. The dredge was rebuilt in 2004 with new C-15 main engine, gear box, clutch, pump and pedestal 3304 rebuilt, gen set dipped, new suction hose, OEM controls and hydraulic system. This is a contractor's dredge that has been working, and is out of the water and in a dry storage warehouse. The pump shell can be changed to a 14-inch if desired.

Located in the state of California, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 325,000
Price in Your Preferred Currency
USD 325,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Year Built: 1967
  Length Over All: 12.19 m 40 feet
  Width: 3.44 m 11.3 feet
  Depth: 1.22 m 4 feet
  Draft: 0.91 m 3 feet
  Five water tight compartments, Tanks pinned together.
  Weight: 26,000 lbs. each
  Ladder:
    Length: 13.72 m 45 feet
    Width: 2.44 m 8 feet
    Depth: 304.8 mm 12 inches
  Weight: 17,000 lbs.
  Machinery Frame:
    Length: 13.72 m 45 feet
    Width: 2.62 m 8.6 feet
    Depth: 3.66 m 12 feet
  Weight: 17,000 lbs.
  Digging Depth: 7.62 m 25 feet
  Fuel Capacity: 9,464 liters 2,500 gallons
Main Engine
  Make/Model: Caterpillar / C-15 (heat exchanger cooled)
  Power: 373 kW 500 hp
  Runtime Hours: 2,923 hours
  Gear:
    Make/Model: Cotta / GR16
    Ratio: 3 to 1
      Twin Disc IBF 214 Clutch
Electrical
  Make/Model: Caterpillar/ 3304
  Type: 110/220/440, Radiator cooled
  Power: 142 kW 190 hp
  With Generator:
    Make/Model: Boekering
    Power: 90 kW 120 hp
Main Dredge Pump
  Make/Model: Thomas Simplicity / Series J36
  Impeller: 4 Vane Impeller
  Suction Diameter: 304.8 mm 12 inches
  Discharge Diameter: 254 mm 10 inches
Service Water Pump
  Make/Model: Berkely
  Diameter: 50.8 mm 2 inches
  Power: 15 kW 20 hp
Control Levers
  Electric over hydraulic with OEM controls, ladder and spuds are independent of swing, variable
  speed.
Winches
  Make/Model: 5 Individual Wichata ATV 214 vent clutch packs
  Shaft Ladder & Swings: 63.5 mm 2.5 inches
  Wire: 12.70 mm 1/2 inch
  Spuds (wire): 19.05 mm 3/4 inch
Spuds
  Dimensions: 254 mm x 13.72 m x 12.70 mm wall 10 inch x 45 feet x 1/2 inch wall
Electronics
  Toshiba lap top with Hypak, dredge pack, with all interfacing equipment.
Stern Hose
  Discharge Hose: 304.8 mm x 9.14 m 12 inches x 30 feet
Cutter x 1
  Blades (5): 914.4 mm 36 inches
Paint
  Hull: Ameron 235 epoxy
  Machinery: Ameron 1001 series
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005