Dredge Brokers - Used Dredgers (Dredges) For Sale

160310-DB

24-inch DSC Dredger w/ Work Boat 24-inch DSC Dredger w/ Work Boat

24-inch DSC Dredger w/ Work Boat

This 24-inch DSC Dredger was built in 2007 and the Work Boat was built in 2006 by the Dredging Supply Co. Inc. in Louisiana, USA.

The dredger is a non propelled cutter suction dredge with one main pontoon and two side pontoons assembled with spuds.

All spare parts & discharge pipe are included in the price.

The work boat is a self propelled Twin Screw work boat of all welded steel construction. The wheel house with all around visibility is situated towards the aft part. The general layout of the compartments are engine room, wheel house, crew accommodation and main deck.

Located in the Persian Gulf

Select Your Currency
Price in Seller's Preferred Currency
USD 6,310,000
Price in Your Preferred Currency
USD 6,310,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
Dredger
  Year Built: 2007
  Length Over All: 40.56 m 133 feet
  Beam: 8.99 m 29 feet
  Hull Depth: 2.50 m 8 feet
Dredging Capacities
  Max. Depth of Digging: 15.00 m 49 feet
  Min. Depth of Digging: 1.52 m 5 feet
  @ Min. Digging Width: 56.70 m 186 feet
  @ Max. Digging Width: 45.70 m 150 feet
Dredge Pump
  Make/Model: Metso
  Suction Diameter: 610 mm 24 inches
  Discharge Diameter: 610 mm 24 inches
Cutter
  Operating Torque: 80,800 in./lbs.
  Cutter Diameter (ID): 1,346.2 mm 53 inches
  Shaft Diameter: 203.2 mm 8 inches
  Cutter Rating: 298 kW 400 hp
  Cutter Speed Variable: 0 - 26 RPM
Machinery
  Main Engine:
    Make/Model: Caterpillar / 3516 DITA
    Power @ 1,800 RPM: 1,491 kW 2,000 hp
  Main Engine Reduction Gear:
    Make/Model: Twin Disc/MG-5600
    Ratio: 4.03:1
  Auxiliary Engine:
    Make/Model: Caterpillar / 3508 DIT
    Power @ 1,800 RPM: 820 kW 1,100 hp
  Marine Generator:
    Make/Model: Caterpillar /4.4 DIT
    Power @ 1,500 RPM: 57 kW 76 hp
  Marine Generator:
    Make/Model: Caterpillar /4.4 DIT
    Power @ 1,500 RPM: 56 kW 75 hp
Winches
  Swing Winch Pull:
    Make/Model (Port & Starboard): Pull Master /H75-9-191-1 x 2
    Line Pull: 75,000 lbs.
    Line Speed (1st Layer): 69 / 102 ft./min.
    Wire Size: 31.75 mm 1-1/4 inches
    Drum Capacity: 199.3 m 654 feet
    Installed Wire Rope: (182.9 m x 34.75 mm) 600 feet x 1-14 inches
      EIPS IWRC 6X37, w/thimble eyes on one end
  Ladder Winch:
    Make/Model: Pull Master
    Line Pull: 25,000 lbs.
  Spud Winch:
    Make/Model: Pull Master
    Line Pull: 25,000 lbs.
DGPS Dredge Navigation System
  1 x Trimble, Hydropro Software
Fire Fighting & Safety Equipment
  Fire Detection System x 1
  Fire Fighting Equipment - 5 x 4.4 liters (1.2 gallons) DCP
  VHF Radio x 1
  Life Jackets x 20
  Life Buoys x 4 pcs (one with light)
Other Details
  Spare Parts for Dredge Pump (Dredge pump casing, Impeller, Discharge & Suction side wear plate)
    1 each - New
  MS Pipeline UNE. (Size - 609.6 mm [24 inches] & L-12 m [L-39 feet] with 150 Standard Flange)
    500 m (1,640 feet) - Used & in Good Condition
  MS Floating Pontoon ( Size - 1.2 m [4 feet] Diameter & L- 2.5 m [8 feet])
    30 sets - Used & in Good Condition
  Discharge Sliding Valve (Size - 609.6 mm [24 inches] & L -2 m [L-7 feet])
    2 each - Used & in Good Condition
  MS- Y- Piece for Discharge (Size - 609.6 mm [24 inches] & L-2 m [L-7 feet])
    1 each - Used & in Good Condition
  MS Water Box (Width - 1.2 m [4 feet], L-2 [L-7 feet], H-3.15 m [H-10 feet])
    4 each - Used & in Good Condition
  MS Bend (Short) - (Size - 609.6 mm [24 inches] & L-0.7 m [L-2 feet])
    2 each - Used & in Good Condition
  Anchors for Floating Pipeline
    3 each - Used & in Good Condition
   
Work Boat
  Year Built: 2006
  Length Over All: 12.42 m 41 feet
  Beam: 4.56 m 15 feet
  Depth: 1.80 m 6 feet
  Height Scantling: 6.70 m 22 feet
  GRT/NRT: 41.45/12.42
Machinery
  Main Engines (2):
    Make/Model: Caterpillar / 3406 - 6 cylinders
    Power @ 1,800 RPM: 224 kW x 2 300 hp x 2
  Coupled to a Twin Disc Gear Box:
    Make/Model: MG5095SC
    Ratio: 2.47:1
  Auxiliary Engine:
    Make/Model: Kubota Diesel
    Power: 11 kW 15 hp
    Output: 50 HZ, 60 Amp with Stamford Alternator
Winch
  Fixed Boom (A-Frame) Hydraulic Winch, Winch Pull - 8,500 lbs.
Crane
  Type: Knuckle Style
  Rotation: 360 Degrees
  Capacity: 1,914 kgs @ 1.90 m (6 feet)
    680 kgs @ 4.95 m (16 feet)
    with 544 kgs Line Pull
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005