Dredge Brokers - Used Dredgers (Dredges) For Sale


12-inch GIW Booster Pump

12-inch GIW Booster Pump

After the pump unit was removed from service, it was blasted with walnut shells and painted with a Carboline 635 Beige primer coat and a Carboline 134 HG Haze Gray top coat. The booster pump is for sale “as is, where is, with all faults and no warranty (written or implied) as to condition or suitability for use”.

Located in the state of Louisiana, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 170,000
Price in Your Preferred Currency
USD 170,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
    Make/Model: GIW 12 x 14 - 28 LCC-M
    CCW rotation when looking into the suction of the pump
    Suction Diameter: 355.6 mm 14 inches
    Discharge Diameter: 304.8 mm 12 inches
    Shaft: 125 mm 5 inches
    Free Passage: 5.3 x 7.13

19.05 mm

3/4 inch
    Pump is rated up to 116 psi (Pump can be converted from model “M” to an “XH” rated 230 psi with
    installation of an “XH” shell & suction door)
  Reduction Gear: Twin Disc 514 C-2-1 with SAE 1/0 adaptor & PX-11783
    CENTA coupling drive
    Ratio: 2:1

Unit Dimensions (approx.):

    Length: 5.50 m, 152.4 mm 18 feet, 6 inches
    Width: 1.83 m, 76.2 mm 6 feet, 3 inches
    Height with muffler:  2.74 m, 279.4 mm 9 feet, 11 inches
    Height without muffler:  2.44 m, 203.2 mm 8 feet, 8 inches
  Unit Weight (approx.): 17,500 lbs.
  Pump Engine:
    Make/Model: CAT / 3412
    Continuous Power @ 1,800 RPM:               406 kW 545 hp
    Intermittent Power @ 2,100 RPM: 485 kW 650 hp

(“C” rating, for 6 hrs in a 12 hr period)

    Make/Model: Atra-Flex T-7 RBS x RBS
  Air Compressor:
    Make/Model: Haldex / MLEL13020X
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright © 2018