Dredge Brokers - Used Dredgers (Dredges) For Sale

160521-DH

10-inch Horizontal Dredger NEW BUILD IMS 7012-HP

10-inch Horizontal Dredger NEW BUILD IMS 7012-HP

This 10-inch Horizontal Dredger is a Model IMS 7012-HP, it is ready for inspection and delivery.

Located in Mexico

Select Your Currency
Price in Seller's Preferred Currency
USD 733,000
Price in Your Preferred Currency
USD 733,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Length Over All: 15.70 m 51.5 feet
  Width: 3.66 m 12 feet
  Height: 3.20 m 10.5 feet
  Draft: 0.914 m 3 feet
  Displacement: 27,400 kg 60,500 lbs
  Weight: (less fuel) 21,636 kg 47,700 lbs
  Floatation (Pontoons):
  Two (2) Pontoons: 143 x 1,092 x 11,887 mm 45 x 43 x 468 inches
 

10 ga. Steel sides and bottom w/ 1/4 " diamond deck; internal bulkheads & stiffeners;

  & painted w/ a marine grade epoxy-urethane paint.
Dredging Capacity
  Dredging Depth: 9.10 m 30 feet
  Cut (width x depth): 3,430 x 660 mm 135 x 26 inches
Engine
  Make/Model: John Deere Diesel/6135HF070(6 cylinder - 13.5L)
  Power @ 2,100 RPM: 317 kW 425 hp
  Fuel Capacity:    1,516 liters 400 gallons
  Fuel Consumption:    79.4 liters/hr 20.6 gallons/hr
Hydraulic Systems
  Circuit #1: Slurry Pump; 7.9 in/rev. 80 gpm (5.05 liter/sec.) @ 5,500 psig
  Circuit #2: Cutter head, Boom, Winches and STARWHEELs, 7.9 in3/rev. load
    sense, 72 gpm (4.54 liter/sec.) @ 2,500 psig
  Reservoir: 454 liters 120 gallons
  Filtration: 1 tank mounted return filter with a 10 micron (min.) rating with
    an indicator & cab warning light. Slurry pump circuit remote charge
    filter 6-micron (min.) rating with an indicator and cab warning light.
    Filter with water removal capability is optional.
Cutter Head
  Cutter Bar:
    Diameter: 660 mm 26 inches
    Length: 3,430 mm 135 inches
  Drive: Recessed dual hydraulic motor; direct drive with no gear reduction
  Speed (variable): 0 to 95 rpm @ 2,500 psi
  Torque: 23,885 in-lbs (2,969 N-m) @ 2500 psi (peak)
  Cutter Tip Force: 1,837 lbs. (8,171 N)
Dredge Pump
  Type: GIW Cast Iron LCC-M 250-660
  Discharge Diameter: 254 mm 10 inches
  Suction Diameter: 304 mm 12 inches
  Impeller Diameter: 660 mm 26 inches
  Sphere Passage: 127 mm 5 inches
  Pump Performance: 315 liter / sec@38 m 5,000 GPM / sec @ 125 feet
Controls
  Electronic joystick controls are provided in a climate controlled cab.
Propulsion
 

STARWHEEL® Drive Self-Propulsion system; cable drive optional

  STARWHEELs® are individually operated for high maneuverability
Speed (variable)
  0 to 15 rpm (starwheel drive)
  0 to 55 fpm (cable drive)
Electrical System
  Voltage: 12 volt, negative ground
  Alternator Output: 130 Amp
Parts & Accessories
  1 x USCG Type III Life Jacket
  1 x 5 gallon Pail of GIW Blue Pump BRG BLCK-5 Oil
  12 x Hose Assy. 12 in. x 25 ft.
  12 x 12 in. Locking Clamps
  12 x Float Discharge Assy.
  1 x ACC Final Ship, IMS 7012 Kit:
    1 x Open End Wrench Set
    1 x Crescent Wrench Set
    1 x STD Allen Wrench Set
    1 x Multiple Screw Driver
    1 x Fire Extinguisher, 10 lb. ABC
    1 x Hydraulic Filter Z SE-10
    1 x Cutter Head Flail Assy., 7012 Kit
    2 x Deep MTG Pivot WLDT Hinges
    1 x Cutter Up Angle WLDT Suction
    1 x Element Charge Filter Linde 132
    1 x Element Hydraulic Filter Park KLS8
    1 x Grease Gun, Olson 4300-22840
    1 x 20 in. Life Ring, Buoy
    1 x GIW Seal installation Kit
    1 x 20 in. Extension Socket
    1 x 1/2 in. Drive Socket Set
    1 x Metric Allen Wrench Set
   
 

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

 
Copyright 2005