Dredge Brokers - Used Dredgers (Dredges) For Sale

160531-DH

8-inch Horizontal Dredge, VMI MD-815

8-inch Horizontal Dredge, VMI MD-815

This Dredge is ready for inspection and the seller also has 400 feet of 8 inch floating dredge hose available for sale as well.

Located in the State of Missouri, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 180,000
Price in Your Preferred Currency
USD 180,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Make/Model: VMI / MD-815
  Length Over All: 11.73 m 39 feet
  Height (without A/C): 2.69 m 9 feet
  Width: 3.02 m 10 feet
  Draft: 0.635 m 2.08 feet
  Weight (approx.) 11,800 kg 26,015 lbs.
  Fuel Capacity: 1,230 liters 325 gallons
Main Engine
  Make/Model: Cummins / QSL 9
  Power @ 2,100 RPM 261 kW 350 hp
Pump
  Type: Hi-chrome cast iron, centrifugal, recessed impeller
  Pump Hours: 1,809 hours
  Impeller: 635 mm 25 inches
  Suction: 203.2 mm 8 inches
  Discharge: 203.2 mm 8 inches
  Capacity (water @ 68°F): 7.75” (196 mm) Sphere - Variable to 3,000 GPM
    (11,355 L/min) @ 130' (39.6 m) head @ 960 RPM
Cutter Assembly     
  Type: Horizontal with full-width, flow-through suction
  Size (diameter x width): 3.02 m x 533.4 mm 10 feet x 21 inches
  Speed: Variable 0-80 RPM (forward and reverse)
  Torque: 56,000 in-lbs. (6,328 N∙m)
  Operating Depth: Variable to 15' (4.57 m) maximum
Pontoons
  Dimensions: Two - 34" (863.6 mm) x 40" (1,016 mm) x 34' 6" (10.52 m)
  Description: 10 gauge steel, integral bulkheads and stiffeners, formed
    for rigidity, cora-foam filled
Propulsion       
  Type: Treble sheave hydraulic winch
  Traverse Speed: Variable 0-50 ft/min (0-15.2 m/min)
  Cutting Speed: 0-15 ft/min (0-4.57 m/min)
Hydraulic System
  Pumps: Variable displacement, axial piston
  Motors: Fixed displacement
  Capacity: Total, 170 GPM (681.3 L/min) @ 2,200 RPM
  Reservoir: 379 liters 100 gallons
Drive       
  Description: Hydraulic pump drive, direct from engine
Filters
  Description: Protected hydrostatic loop, high pressure suction & return
Relief Settings       
  Centrifugal Pump: 4,000 psi (276 bar)
  Cutter Head: 3,000 psi (207 bar)
  Accessories: 3,000 psi (207 bar)
  Boom: 1,500 psi (103 bar)
Electrical System       
  Alternator: Output - 100 amp
  Battery: Heavy Duty - 12 volt
   
 

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

 
Copyright 2005