Dredge Brokers - Used Dredgers (Dredges) For Sale

160314-DH

6-inch Mudcat 915 Dredger, Newly Refurbished

6-inch Mudcat 915 Dredger, Newly Refurbished

This Dredge has been completely refurbished and is in amazing condition. The boom with the exception of the auger is completely new. The seller owns a sandblasting and coatings company, so it was done to last for years in a corrosive environment.

Located in Canada

Select Your Currency
Price in Seller's Preferred Currency
USD 99,000
Price in Your Preferred Currency
USD 99,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Length Over All: 11.62 m 38.11 feet
  Width: 2.74 m 9 feet
  Height Over All: 2.68 m 8.8 feet
  Draft: 533.4 mm 21 inches
  Floating Clearance: 1.80 m 5.9 feet
  Fuel Capacity: 1,325 liters 350 gallons
Floatation
  Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
  10 Gauge H. A. Steel with Internal Bulkheads and Stiffeners: formed for rigidity; polyurethane
  foam fitted.
Cutter Assembly
  Auger:
  Diameter: 4.15 m 13.625 feet
  Pitch: 279.4 mm 11 inches
  Flighting: 9.53 mm 0.375 inches
  Speed: Up to 100 RPM
  Cutter Knives: 45 Detachable Heat-Treated Blades
  Cutter Bars: 36 Detachable heat-Treated Blades
  Auger Torque: 18,000 in. lbs.
  Rotates to Cut Slope up to 45 degrees
Mud Shield
  Hydraulic Adjustable: 482.6 x 482.6 mm 19 x 19 inches
Working Capacity
  Cut (width x max. depth): 2.74 m x 457.2 mm 9 feet x 18 inches
  Maximum Digging Depth: 3.05 m 10 feet
Main Engine
  Make/Model: Detroit Diesel / 6-71 RC
  Power @ 1,800 RPM 130 kW 175 hp
Drive
  Clutch - Manual, 14 inch (355.6 mm) Diameter Disc & Pressure Plate
  Reduction - Gear Ratio: 1.55/1 - Drive Coupling Flex Type
Pump
  Type: Centrifugal Closed Impeller
  Impeller Diameter: 495.3 mm 19.5 inches
  Suction Diameter: 203.2 mm 8 inches
  Discharge Diameter: 152.4 mm 6 inches
  Shaft Diameter: 73.03 mm 2.875 inches
  Capacity: 2,000 GPM @ 1,160 RPM against 54.86 m (180 feet) Head
  Material Removal (up to): 91.75 cubic meters/hr 120 cubic Yards/hr
Service
  Capacity: 75 GPM @ 1,800 RPM
Water Pump
  Pressure: 80 PSI
Hydraulic System Dual Pumps
  Capacity Total: 30.5 GPM @ 1,800 RPM
  Reservoir: 214 liters 47 gallons
  Circuit One: Auger Drive
  Circuit Two: Boom, Mud Shield and Winch
  Relief Valve Setting:
  Auger: 3,000 PSI
  Others: 1,800 PSI
Propulsion
  Treble Sheave Hydraulic Winch
  Traverse Speed - 50 FPM Maximum FWD & REV.
  Average Cutting Speed - 8 to 12 FPM
Electrical System Voltage
  Electrical System Voltage: 12 V
  Alternator Output: 65 Amps
  Batteries: 12 V, 205 Amps/hr, Parallel Wires
  Average Cutting Speed: 8 to 12 FPM
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005