Dredge Brokers - Used Dredgers (Dredges) For Sale


8-inch Badger Dredger with Pipeline and Work Boat

8-inch Badger Dredger with Pipeline and Work Boat

This 8-inch Badger Dredger was built in 2003 and features a 250 hp Caterpillar diesel engine. The dredge is ideal for smaller dredging jobs where more compact equipment is required due to work area limitations. The pipeline and work boat are included in the price.

Located in Mexico

Select Your Currency
Price in Seller's Preferred Currency
MXN 1,970,000
Price in Your Preferred Currency
USD 101,809
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Year Built: 2003
  Hull Length: 12.20 m 40 feet
  Length Over All (w/ladder): 16.50 m 54 feet
  Hull Depth: 0.91 m 3 feet
  Hull Width: 3.00 m 10 feet
  Hull Draft (approx.): 0.5 m 2 feet
  Overall Height (trucking): 2.80 m 9 feet
  Total Dry Weight (approx): 17,464 kg 38,500 lbs.
  Diesel Fuel Capacity: 568 liters 150 gallons
  Ladder Length: 7.30 m 24 feet
Main Engine
  Make/Model: Caterpillar / C7 ACERT - diesel engine
  Power @ 2,200 RPM 186 kW 250 hp
    The engine is attached to a Twin Disc clutch.
Dredging Capacities
  Maximum Dredging Depth: 6.09 m 20 feet
    @ 60 degree angle on ladder
  Maximum Lateral Cut: 21.3 m 70 feet
    swinging 90 degrees, at approximately 1 m (3 feet) of
    dredging depth
  Lateral Cut: 15.20 m 50 feet
    swinging 90 degrees, at approximately 6.09 m (20
    feet) dredging depth
Cutter Head
  (5) Five Cast Steel Blades
  The cutter head is mounted to a 2-1/2 inch (6.35 cm) stainless steel shaft that is attached to the
  cutter motor.
  Cutter Head Motor:
    Make/Model: Kawasaki / HMB-100
  The hydraulic motor has variable speed capability and is reversible.  Replaceable pin on teeth can
  be added to the cutter head as an option.  The cutter head has a 22 inch (558.8 mm) inside
  diameter back ring with an outside diameter of 30 inch (762 mm).
Dredge Pump
  Make/Model: Metso Minerals, Thomas Simplicity / H24
  Discharge Diameter: 203.2 mm 8 inches
  The pump is rated (49 m) 160 feet TDH @ 2,500 GPM - TDH @ 158 liters/sec. (42 gallons/sec.)
  The maximum particle clearance is 4 inches (101.6 mm)
Service Pump
  The service pump is provided to supply flushing water to the dredge pump packing gland, water to
  the cutter drive bearings and for use at a deck connection.  The pump is a 2-1/2 inch x 2 inch (63.5
  mm x 50.8 mm) and is rated 75 psi @ 125 GPM - 7.9 liters/sec. (2 gallons/sec.)
Hydraulic System
  The hydraulic pump is a 3-section pump that provides service to the cutter head motor, swing
  winches, spud winches and ladder winch.  The hydraulic system is protected by relief valves and the
  system has replaceable inline filters.  The hydraulic system has an approximate capacity of 379 liters
  (100 gallons).
  (5) Five Hydraulic Winches: Used for swinging the dredge, lifting the spuds and
    lifting the ladder.
  All five (5) winches are rated 4,500 lb (20 kN) line pull capacity.  All winches are complete with

galvanized cables.  The swing winches are equipped with 150 feet (45.7 m) of 3/8 inch (9.5 mm) 6 x

  37 cable.
  Two (2) spuds are located on the stern of the dredge. The spuds are 8-5/8 inch (219 mm) diameter x
  20 feet (6.1 m) long.
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright © 2019