Dredge Brokers - Used Dredgers (Dredges) For Sale


10-inch Horizontal Dredger, IMS 4010-LP Self Propelled

10-inch Horizontal Dredger, IMS 4010-LP Self Propelled

This 10-inch Horizontal Dredger, IMS 4010-LP was custom built in 2004 by the manufacturer with a larger cutter / pump module at the request of the original buyer.

Located in the State of Illinois, USA

Also available for sale: Truck and Trailer

Select Your Currency
Price in Seller's Preferred Currency
USD 196,000
Price in Your Preferred Currency
USD 196,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Year Built: 2004
  Length Over All: 11.7 m 38.6 feet
  Beam: 2.9 m 9.7 feet
  Depth: 2.8 m 9.4 feet
  Draft: 762 mm 30 inches
  Weight: 11,340 kg 25,000 lbs.
  Displacement: 10,160 kg 22,400 lbs.
    Two (2) Pontoons: 889 mm x 965 mm x 7.848 mm 35 in. x 38 in. x 309 in.
    10 ga. Steel sides and bottom w/ 1/4" diamond deck; internal bulkheads and stiffeners; and
    coal tar based TNEMEC paint on the outside.
Working Capacity
  Cut (width x depth): 2,438 mm x 559 mm 96 in. x 22 in.
  Working Depth: 6.1 m 20 feet
Main Engine
  Make/Model: John Deere Diesel / 6068HF475 (6 cylinder. 6.8L)
  Power @ 2,400 RPM: 205 kW 275 hp
  Meter Hours: 7,103.3 hours
  Fuel Capacity: 681 liters 180 gallons
  Fuel Consumption: 51.9 liters/hr 13.2 gallons/hr
Hydraulic System
  Circuit #1: Slurry Pump
    4.6 in³/rev.
  Circuit #2: 45 gpm - 2.84 liters/sec. (0.75 gallons/sec.) @ 5,500 psig Cutter
    head, Boom, Winches and Starwheels®
    6.0 in³/rev. load sense
    59 gpm - 3.72 liters/sec. (0.98 gallons/sec.) @ 2,500 psig
  Reservoir: 454 liters 120 gallons
  Filtration: 2 tank mounted return filters with a 10-micron rating and indicator
    suction filter for the slurry pump circuit 3-micron rating and indicator
    filter with water removal capability are optional
Cutter Head
  Cutter Bar:
    Diameter: 559 mm 22 inches
    Width: 254 mm 10 inches
    Length: 2,438 mm 96 inches
    Replaceable hardened steel excavator blades available with paddle bar
    for materials that are not easily slurried.
  Drive: Recessed dual hydraulic motor; direct drive with no gear reduction.
  Speed: Variable to 90 rpm @ 2,500 psi
  Torque: 12,960 in-lbs. (1,475 N-m) @ 2,500 psi
Dredge Pump
  Make/Model: IMS
  Discharge Diameter: 254 mm 10 inches
  Suction Diameter: 254 mm 10 inches
  Impeller Diameter: 495 mm 19.5 inches
  Sphere Passage: 152 mm 6 inches
  Pump Performance: 3,000 gpm - 189 liters/sec (50 gallons/sec.) @ 70 feet (21.3 m)
    TDH (water) @ 1,180 rpm
  Electronic joystick controls are provided in a heated, air-conditioned cab.
  STARWHEEL® Drive Self-Propulsion system; cable drive optional
  STARWHEELs® are individually operated for high maneuverability
Electrical System
  Voltage: 12 volt, negative ground
  Alternator Output: 130 Amp
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005