Hydraulic Dredges
161018-DB
12-inch Cutter Suction Dredge (CSD) Ellicott 670-33
This 12-inch Cutter Suction Dredger (discharging into 14-inch pipeline) was built in 2008. The hull is dismount able in three sections for shipping. The dredger is complete from the cutter to the discharge flange, including a suction check valve for easy priming, and two 500 pound swing anchors. Serial Number JOB 0400740
The dredger is in good condition and ready to work. A pipeline package is included consisting of 900 m ((2952-feet) of 14-inch SDR 17 HDPE pipe, and one section of 14-inch flexible discharge hose.
Location: Mexico, Gulf Side
Select Your Currency:
Price in Seller's Preferred Currency:
USD
832,000
Price in Your Preferred Currency:
USD 832,000
* Approximate; see
Terms of Use
Technical Details
| Principal Dimensions and Characteristics | ||||
| Length Over All with ladder | 23.62 m | 77.5-feet | ||
| Length of Hull | 15.24 m | 50-feet | ||
| Beam: | 6.03 m | 20-feet | ||
| Depth of Hull | 1.22 m | 4-feet | ||
| Hull Draft (less spuds) | 0.9 m | 2.83-feet | ||
| Dry Weight (Approximate) | 61-tonnes | 67-tons | ||
| Fuel Capacity | 10,221-liters | 2,700-gallons | ||
| Runtime Hours | 11,270 | |||
| Class: | None | |||
| Build Year / Location | 2008 / USA | |||
| Dredging Capacities | ||||
| Max. Dredging Depth: | 10 m | 33-feet | ||
| Swing Width @ Minimum Dredging Depth | 29.6 m | 97-feet | ||
| Swing Width @ Maximum Dredging Depth | 21.9 m | 72-feet | ||
| Dredge Pump | ||||
| Make / Model: | Ellicott / | |||
| Suction Diameter: | 356 mm | 14-inches | ||
| Discharge Diameter: | 305 mm | 12-inches | ||
| Engine | ||||
| Make/Model: | Caterpillar / C-27 | |||
| Power | 596 kW | 800 hp | ||
| Cooling: | Box Cooler | |||
| Cutter | ||||
| Type: | Basket | |||
| Power: | 75 kW | 100 hp | ||
| Speed (Variable): | 0 to 36 RPM | |||
| Cutting Force Total | 3,358 kg | 7,405 lbs | ||
| Cutter Diameter | 1092 mm | 43-inches | ||
| Spuds | ||||
| Diameter | 400 mm | 16-inches | ||
| Length | 13.3 m | 43.5-feet | ||
| Maintenance | ||||
| Ladder | Replaced Lift Cylinder Rod - 10,431-hours | |||
| Dredge Pump | Replaced Sleeve - 11,066-hours | |||
| Replaced Impeller - 8,161-hours | ||||
| Replaced Drive Belt - 8,434-hours | ||||
| Repaired Pump Drive Clutch - 11,182-hours | ||||
| Spud Cylinder Port Side | Replaced Seals - 9,940-hours | |||
| Spud Cylinder Starboard Side | Replaced Seals - 10,201-hours | |||
| Main Engine | Changed Oil and Filters every 250-hours (latest at 11,141-hours) | |||
| Hydraulic System | Changed Oil and Filters - 8,560-hours | |||
| Dredge Pump Bearing Housing | Chanced oil every 600 hours (latest at 10,836-hours) | |||
| Swing Winches | Changed Oil every 2000 hours (latest at 10,526-hours) | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||