Dredge Brokers - Used Dredgers (Dredges) For Sale


6-inch Horizontal Cutter Dredge - Mud Cat® SP-810

6-inch Horizontal Cutter Dredge - Mud Cat® SP-810

This 1994-built dredge could use cleaning and painting, but it is in overall fair condition. Owner prefers to sell the dredge, trailer and truck en-bloc, but they will consider separating.

The trailer is homemade and needs some brake work, and replacement of some floorboards. The owner has the parts to do this, and they are included. The truck is a 2003 Volvo VNL64T Daycab. Engine is a Cummins iSX driving a 10-speed transmission. Approximately 660,000 total miles, and minimal miles since last maintenance.

Location: State of Ohio, USA

Price for Dredge, Truck and Trailer en bloc: USD 74,000

Select Your Currency
Price in Seller's Preferred Currency
USD 74,000
Price in Your Preferred Currency
USD 74,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Year Built / Where Built 1994 / USA  
  Length Over All: 31-feet, 1-inch 16.56 m
  Width: 8-feet 2.44 m
  Height Over All: 8-feet, 9.5-inches 2.68 m
  Working Draft: 22-inches 0.56 m
  Weight (dry): 13.200-pounds 5987 kg
  Fuel Capacity 100-gallons 379 L
    Two (2) Pontoons: 30 inches x 32-inches x 300-inches (762 mm x 813 mm x 7620 mm), 12 gauge steel w/ internal bulkheads and stiffeners. Polyurethane foam filled
Dredging Capacities
  Dredging Depth: 10-feet 3.00 m
  Width of Cut: 8-feet 2.44 m
  Nominal Depth of Cut: 18-inches 127 mm
Dredge Pump
  Type Centrifugal Recessed Impeller
  Discharge Diameter: 6-inches 152 mm
  Suction Diameter: 6-inches 152 mm
  Impeller Diameter 12-inches 305 mm
  Pump Performance @1600 RPM: 1000-gpm (4546 L/min) against 100-feet (30 m) head (water)
  Make / Model: Detroit Diesel / 4-53T - 5043-8301 - N-65 Injectors
  Type: 4-Cylinder Inline Diesel
  Power @ 2100 rpm: 160 hp 119 kW
  Type Treble Sheave Hydraulic Winch
  Traverse Speed forward and reverse 32 feet/min. (max) 9.75 m/min
  Average Cutting Speed 8 to 10 feet/min. 2.44 to 3.0 m/min.
  Type Auger with replaceable heat treated cutter blades
  Diameter 9-inches 229 mm
  Auger Pitch 9-inches 229 mm
  Flighting 3/8-inches 9.5 mm
  Speed Variable 0 to 89 rpm
  Torque (nominal) 11,000 in-lbs 1242 N-m
  Torque (maximum) 12,000 in-lbs 1356 N-m
Electrical System
  Voltage 12-Volt, Negative ground
  Alternator Output 42 Amp
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005