Dredge Brokers - Used Dredgers (Dredges) For Sale

170409-DW

16-inch Water Jet Cutter Suction Dredger

16-inch Water Jet Cutter Suction Dredger

This 16-inch Water Jet Cutter Suction Dredger is designed to excavate underwater soils in order to transport pulp to stock heaps, concentration plants or depositing sites. The dredger consists of three pontoons: main and two side ones. Pontoons are divided into sealed compartments that at damage of any one of them allow the vessel to remain afloat.

Location: Russia

Select Your Currency
Price in Seller's Preferred Currency
USD 296,000
Price in Your Preferred Currency
USD 296,000
* Approximate; see Terms of Use

Technical Details

         
Principal Dimensions and Characteristics
  Length Over All: 27.1 m 89 feet
  Length: 17.2 m 56.4 feet
  Beam: 6.72 m 22.04 feet
  Board Draft: 1.5 m 5 feet
  Light Draft (average): 0.8 m 2.6 feet
  Dredging Depth (with hydro jets): 12 m 39.4 feet
  Dredging Depth (with cutter): 8 m 26.2 feet
  Hull
    Material: Sheet Steel
    System: Transverse
Slurry Pump
  Make: GRUT
  Capacity (on water): 1,400 cubic meters per hour 1,831 cubic yards per hour
  Capacity (on sand): 140 - 210 cubic meters per hour 183 -275 cubic yards per hour
  Head: 40 m 131.2 feet
  Impeller Diameter: 700 mm 27.6 inches
  Particle Size (maximum): 150 mm 6 inches
  Flanges
    Discharging Outer Diameter: 560 mm 22 inches
    Internal Diameter: 390 mm 16 inches
  Suction
    Recommended Diameter: 425 mm 16.7 inches
    Recommended Discharge Diameter: 425 mm 16.7 inches
Diesel Engine (Diesel engine rotating ground pump)
  Make/Model: YAMZ Diesel / 240 NM2
  Power @ 750 RPM: 373 kW 500 hp
Diesel Generator
  Make/Model: YAMZ Diesel / 238 or 236
  Power: at least 100 kW 134.1 at least hp
  Current: Alternating 3-phase
  Rated Voltage: 380 V
Fuel Oil Tanks (3)
  Side Pontoons Tanks (2): 7.5 cubic meters x 2 9.8 cubic yards x 2
  Central Pontoon Consumable Tank (1): 0.5 cubic meters 0.7 cubic yards
Soil Unit
  Ladder with Ripper Hydro Jet
  Ladder with Suction Pipe
  Electric Motor:
    Power: 37 kW 49.6 hp
Mooring and Towing Device
  Four (4) bollards located on the side pontoons, two (2) in the bow and two (2) in the stern
Pontoons
  Main Pontoon
    Side Shell: 5 mm 0.20 inches
    Deck: 5 mm 0.20 inches
    Transom Pieces: 5-8 mm 0.20 - 0.32 inches
    Bottom Shell: 6 mm 0.24 inches
  Side Pontoons
    Side Shell: 5 mm 0.20 inches
    Deck: 5 mm 0.20 inches
    Transom Pieces: 5-8 mm 0.20 - 0.32 inches
    Bottom Shell: 5 mm 0.20 inches
  Hull
    Material: Sheet Steel
    System: Transverse
Safety Equipment
  Three (3) powder extinguishers; two (2) in the engine room, and one (1) in the cabin
  Two (2) life buoys; including one (1) with a life lin
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005