Dredge Brokers - Used Dredgers (Dredges) For Sale

170541-DM

7 m3 Excavator Dredger w/ 18 m Dredging Depth

7 m3 Excavator Dredger w/ 18 m Dredging Depth

This 7 m3 Excavator Dredger w/ 18 m Dredging Depth was built in Japan in 2000. Its' Classification Society and Notation is RMRS (Russian Maritime Register of Shipping) - (KE)*R3 dredger. This dredger is designed for dredging the marine basins with a maximum wave height of 0.5 meters, as well as intra-basins. Its' next Dry Docking will be December of 2018 and its' next Special Survey will be November of 2020. This dredger is equipped with two sticks: "short" with buckets of 8.5 m3 and 7 m3 with (dredging depth up to 10 m) and "long" with a bucket of 3 m3 with dredging depth up to 20 m.


Flag: Russia

Location: Far East, Russia

Select Your Currency
Price in Seller's Preferred Currency
USD 1,390,000
Price in Your Preferred Currency
USD 1,390,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Year Built: 2000
  Classification (Russian Maritime Register of Shipping) - (KE)*R3 dredger
  Length Over All: 50 m 164 feet
  Beam: 18.02 m 59 feet
  Draft: 1.6 m 5 feet
  Depth: 2.94 m 10 feet
  Maximum Dredging Depth: 18 m 59 feet
  GRT / NRT: 755 / 226
  Deadweight: 506 tonnes
  Displacement: 1,378 tonnes
Accommodation
  15 x Sleeping Places
Engines
  Auxiliary Engines (2):
    Power: 176 kW 236 hp
    Power: 36 kW 48 hp
Cargo and Tank Capacites
  Fuel Tank: 16 cubic meters cubic yards
  Fresh Water: 30 cubic meters cubic yards
  Ballast Tanks: 300 mts
  Cargo on Deck: 650 mts
Deck Equipment
  Excavator:
    Make/Model: Komatsu / PC1600
    Power: 321 kW x 2 430 hp x 2
    Grab Volume Capacities: 7 cubic meters 9.2 cubic yards
      3 cubic meters 4 cubic yards
  Winches:
    Mooring Hydraulic Winches (Fore - 2pcs/ Aft- -2pcs):
    Make/Model: KHSW 12/6
    Pulling Force: 11,300 kg 24,912 lbs
    Aft Hydraulic Winch (For Lifting the Rod 1 pc):
    Length: 25 m 82 feet
    Pulling Force: 11,300 kg 24,912 lbs
    Hydraulic Winch (For Lifting the Side Bar 2 pcs):
    Square Section: 1 x 1 m 3.3 x 3.3 feet
    Length: 25 m 82 feet
    Pulling Force: 25,000 kg 55,116 lbs
  Anchors (5):
    Hall's Anchors (4): 3 Tons
    Navigation Anchor (1): 2,756 lbs 1,250 kg
  Spuds (3):
    Length: 25 m each 82 feet each
Navigation and Communication Equipment
  GMDSS
  A1
  Reson PDS2000
  1 GPS RTK
  2 GPS compass
  3 potmeter sensor
  2 roll/pitch sensor
  1 draft sensor
  2 wi-fi 5gHz
  2 reson cabinet interface
  2 computers x 4 monitor
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005