Dredge Brokers - Used Dredgers (Dredges) For Sale

170701-DH

6-inch Horizontal Dredger "Dino 6"

6-inch Horizontal Dredger "Dino 6"

This 6-inch Horizontal Cutter Dredger was built in 2012, and has 5,600 total runtime hours on it. It worked on one job-site for it's entire life. The dredger is in great working condition and has no leaks, and no mechanical issues. It is ideal for sediment removal from small bodies of water such as (for example) marinas, ponds, lagoons, canals and small lakes.

Located in the state of Texas, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 59,000
Price in Your Preferred Currency
USD 59,000
* Approximate; see Terms of Use

Technical Details

         
Principal Dimensions and Characteristics
  Length Over All: 21-feet 6.40 m
  Width: 5.92-feet 1.83 m
  Height Over All: 5.33-feet 1.62 m
  Dry Weight: 3,800 lbs 7,724 m
  Year Built / Where Built: 2012 / USA
  Manufacturer: Geoform International, Inc.
Dredging Capacities
  Dredging Depth: 13 feet 3.96 m
  Width of Cut: 5.5 feet 1.7 m
Dredge Pump
  Make: Geoform International, Inc
  Material: AR Steel, 400 to 500 Birnell
  Discharge Diameter: 6 inches 152.4 mm
  Performance (Max): 1,800 gpm 6,814 L/min
  Performance @ 60-feet (18 m) THD: 1,100 gpm 4,164 L/min
  Impeller Type: Open Face
Engine
  Make / Model: Cummins
  Type: 4-cylinder, 4-stroke diesel
  Horsepower: @ 2,500 RPM 65 hp 48.47 kW
  Fuel Capacity: 30 gallons 113.6 liters
Hydraulic System
  Pump: Tandem gear 2.60in³/rev. and .91in³/rev.
  Filtration: 10 micron
  Reservoir: 25 gallons 95 liters
  Oil cooler thermostatically controlled
  Stainless steel tubing on boom 
  Impeller high-low speed selector valve
Travel System
  Double pulley hydraulic windlass with 2 hydraulic motors
Cutterhead
  Type: Replaceable, hardened steel trencher teeth and mixing paddles
  Width: 66-inches 1,676 mm
  Diameter of Paddle Bar 14-inches 356 mm
  Drive Variable speed dual hydraulic motor Direct Drive
Pontoons (2)
  Size: 26 in. x 22 in. x 192 in.
  Material: Stainless Steel
  16 gauge, 3 separate compartments each float (6 compartments total) 
  Internal stiffeners on all sides 
Instrumentation
  Tachometer/hour meter
  Slurry pump hydraulic pressure gauge
  Cutterhead hydraulic pressure gauge
  Discharge pressure gauge 
Safety Engine Shut-Down
  High engine coolant temperature
  Low engine oil pressure 
  High hydraulic oil temperature 
  Low hydraulic oil level 
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005