Dredge Brokers - Used Dredgers (Dredges) For Sale

170902-DB

10-inch Cutter Suction Dredger (CSD) Ellicott 370-HP

10-inch Cutter Suction Dredger (CSD) Ellicott 370-HP

This 10-inch Cutter Suction Dredger (CSD) Ellicott 370-HP was built in 1997 and was completely overhauled in 2006 and in 2017. The dredger has about 8,700 operational hours and was operated in fresh water only, in Switzerland. It also comes with spare parts and approximately 150 m (492 feet) of floating pipe that is included.

Location: The Netherlands

Select Your Currency
Price in Seller's Preferred Currency
USD 245,000
Price in Your Preferred Currency
USD 245,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Year Built / Rebuilt: 1997 / 2006 / 2017
  Hull Length (20 ft. Digging Depth): 11 m 36 feet
  Width: 4 m 12 feet
  Depth: 1.22 m 4 feet
  Mean Hull Draft (Operating Condition): 0.8 m 2.7 feet
  Total Assembled Dry Weight:
    20 ft. Digging Depth: 56,000 lbs.
  Ladder Length:
    20 ft. Digging Depth: 7 m 23 feet
  Ladder Weight:
    20 ft. Digging Depth: 6,000 lbs.
Engines
    Make/Model Caterpillar / 3406
    Power @ 1800 RPM: 321 kW 430 hp
Tank Capacities
  Engine Oil Crankcase Capacity: 34 liters 9 gallons
  Engine Coolant System Capacity: 45 liters 12 gallons
  Fuel Oil Tanks Capacity (2): 3,028 liters 800 gallons
  Hydraulic Oil Reservoir Capacity: 871 liters 230 gallons
  Hydraulic Oil System Capacity: 1,136 liters 300 gallons
  Lube Oil:
    Dredge Pump Bearing Housing: 45 liters 12 gallons
    Swing Winch Planetary Reducer: 0.4 liters 44 ounces
Dredging Installation
  Cutter:
    Shaft Power: 30 kW 40 hp
    Shaft Diameter: 89 m 3.5 inches
    Speeds: 0-39 RPM
    Cutting Force: 3,940 lbs. 190 lbs. per linear inch
    Cutter Diameter: 800 mm 31.50 inches
    Cutter Weight (plain basket): 700 lbs.
    Number of Blades: 4
  Hull Pump
    Make/Model: TPC / 10-27
    Power @ 845 RPM: 276 kW 370 hp
  Suction Pipe
    Inside Diameter: 305 mm 12 inches
    Outside Diameter: 314 mm 12.375 inches
  Discharge Pipe:
    Inside Diameter: 254 mm 10 inches
    Outside Diameter: 264 mm 10.375 inches
  Spuds:
    Diameter: 324 mm 12.75 inches
    Length (20 ft. Digging Depth): 9 m 29 feet
    Weight (20 ft. Digging Depth): 1,764 lbs. each
  Spuds Hoist Cylinders (2):
    Spud Lifting Speed: 22 m per minute 72 feet per minute
    Available Lifting Force: 7,200 lbs.
  Spuds - Hoist Wire Rope:
    Wire Diameter: 13 mm .5 inches
    Length: 7.24 m 24 feet
    Lay: Reg. Right Lay
    Breaking Strength: 13.3 tons
Deck Equipment
  Ladder Hoist Cylinder:
    Extending Force @ 500 PSI: 9,815 lbs.
    Retracting Force @ 2500 PSI: 41,225 lbs.
    Lowering Speed: 5.4 m per minute 17.6 feet per minute
    Lifting Speed: 6.4 m per minute 21 feet per minute
  Swing Winches (2):
    Shaft Rating: 20.6 SHP
    Line Pull: 8,000 lbs.
    Line Speed (first layer): 23 m per minute 75 feet per minute
    Wire Diameter: 13 mm .5 inches
    Wire Length: 61 m 200 feet
    Wire Lay: Reg. Right Lay
    Wire Breaking Strength: 13.3 tons
    Drum Capacity: 61 m 200 feet
    Drum Diameter: 203.2 mm 8 inches
Inventory
  Anchors (2): 150 lbs. each
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005