Dredge Brokers - Used Dredgers (Dredges) For Sale

171004-DB

8-inch Cutter Suction Dredge DSC Moray

8-inch Cutter Suction Dredge DSC Moray

This 8-inch Cutter Suction Dredge DSC Moray was built in 2006. The dredge is equipped with an 8 in x 8 in submersible pump, has a 19' swing in its swinging ladder configuration, is single truck transportable, and has a single C7 CAT engine with approximately 6,000 hours. The Standard Moray Class Dredge features a closed loop hydraulically driven underwater pump, power up/down winches with API rated drums for proper cable storage, a PLC based operating system and stern kicker spuds for dredge advancement and positioning.

Location: Missouri, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 350,000
Price in Your Preferred Currency
USD 350,000
* Approximate; see Terms of Use

Technical Details

         
Principal Dimensions and Characteristics
  Year Built: 2006
  Length Over All (w/ ladder): 13.1 m 42.83 feet
  Transportation Width: 3.63 m 11.92 feet
  Operating Width: 5.63 m 18.5 feet
  Depth of Hull: 1.22 m 4 feet
  Mean Operating Draft: 0.84 m 2.75 feet
  Dry Weight: 15,876 kg 35,000 pounds
  Fuel Capacity: 1,893 liters 500 gallons
  Runtime Hours: 6,000 hours
Dredging Capacities
  Max. Digging Depth: 5.28 m 17.33 feet
  Min. Digging Depth: 0.91 m 3 feet
  Swing Width @ Minimum Dredging Depth: 5.9 m 19.33 feet
  Swing Width @ Maximum Dredging Depth: 4 m 13 feet
  Nominal Pump Capacity: 2,000 gpm @ 185 TDH
Dredge Pump
  Make / Model: Manufactured by DSC
  Suction Diameter: 203.2 mm 8 inches
  Discharge Diameter: 203.2 mm 8 inches
  Impeller Diameter: 495.3 mm 19.5 inches
  Max. Particle Clearance: 89 mm 3.5 inches
Engine
  Make/Model: Caterpillar / C7 ACERT
  Power @ 2200 RPM: 205 kW 275 hp
  Cooling: Residential Grade Silencer
Cutter
  Type: Sealed planetary drive with alloy cutter shaft and anti-friction bearings.
  Cutter Diameter: 610 mm 24 inches
  Nominal Drive Power: 15 kW 20 hp
  Nominal Drive Torque: 31,512 in-lb
  Cutting Force: 1,191 kg 2,626 lbs
  Cutting Speed: 0 - 40
Hydraulic System
  Type: Closed loop dredge pump circuit with infinite electronic speed control.
  Line Pull: 953 kg 2,100 lbs
  Line Speed: 24 m per minute 78 feet per minute
Spuds
  Diameter: 203.2 mm 8 inches
  Length: 7.32 m 24 feet
  Weight (each): 363 kg 800 lbs
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright 2005