Dredge Brokers - Used Dredgers (Dredges) For Sale

100707-CD

Proposed 24 inch Dredge Booster Pump Proposed 24 inch Dredge Booster Pump

Proposed 24 inch Dredge Booster Pump

This Booster Pump has a build time of 20 to 24 weeks from date of order.

Located in The State of Kansas, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 1,350,000
Price in Your Preferred Currency
USD 1,350,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
Proposed Components for Booster Pump
  The major requirements are:
  (1) DMI-GIW 24 x 28 x 72 pump capable of pumping 36,000-46,000 GPM at 206 feet of clear water head with
  2200-2700 continuous HP with 83-84% efficiency, probably 2,450-3,000 continuous HP with slurry,
  (2) Used EMD 20 cylinder 20V645 engine with 3,500 continuous HP at 900 RPM to drive booster pump and
  accessories (radiator fan, packing gland pump, and accessory pack),
  (3) Gear box for 3,000 continuous HP with a maximum 2.77 to 1 reduction,
  (4) Clutch for 3,000 continuous HP at 900 RPM between engine and gear box,
  (5) Coupling between clutch and gearbox for 3,000 HP at 900 RPM,
  (6) Coupling between gearbox and pump for 3,000 HP at 325 RPM,
  (7) Packing gland pump capable of delivering a minimum of 800 GPM at 240 feet of head,
  (8) Master skid base for pump, gear box, and pump gauges and controls, and
  (9) Master skid for engine unit with radiators, accessory pack, clutch, packing gland pump, mufflers, battery and
  electrical controls, engine cover, and engine and clutch controls and gauges. In addition to these major
  components that are numerous minor components to mate the masters kid units together, both mechanical and
  electrical systems.
 
  All of the major components (DMI-GIW dredge pump, EMD 20V645 engine, Gearbox, Clutch, and Packing Gland
  Pump) would be subject to buyer’s approval prior to purchase and fabrication. The DMI-GIW is not new but has
  never been used but must be verified by buyer inspection. The EMD engine has been used but has been dyno-
  tested and can be verified by buyer inspection. The gearbox will be either new or unused and be subject to buyer
  inspection if not new but unused. The clutch, packing gland pump, couplings, and other minor components will be
  new, unless otherwise designated. All warranties supplied by component suppliers will be passed through to
  buyer; however, there are no warranties made on any components without suppliers warranties and no
  warranties are made on the fabrication or performance of the assembled booster pump unit.
 
  The weight of the total assembled booster pump unit (engine unit, pump, gearbox, pump unit) will probably be
  225,000 pounds or 110 tons. The pump and engine are presently available but the gearbox, clutch, couplings,
  and packing gland pump have delivery times from 3-18 weeks for the factory. Much of the fabrication time to put
  the unit together can be done while waiting to for the gear box and other components. Delivery FOB to the State
  of Kansas, USA is probably 20-24 weeks after signing of Contract to Purchase.

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Copyright 2005